Electrical Products

Pull Cord Switch

The Pull Cord Switch is an emergency switch used to stop the belt conveyor instantly when an accident occurs.When an accident occurs or for the normal corrective maintenance, workers can pull cord at any position along with the belt to stop the belt conveyor. It is widely used in various belt conveyor equipments for coal, cement and building materials, mining, electricity, port, metallurgy and chemical industries.

100KN Electric Single Drum Mooring Winch, as the name shows, it is marine electric motor operated with the pulling force 100KN for mooring purpose to hold a boat/ship at a pier or similar fixture.
The winch comply with the 2009 China Classification Society “classification of sea-going steel ships and construction specification ".

Main technical parameters:

Rated Load                100KN   (First Layer)

Rated Speed               15m/min   (First Layer)

Brake Holding             300KN  (First Layer)

Rope Diameter            φ30mm

Drum Capacity             200m

Reducer Model             ZQ850+250-92.21-IV

Electric-motor

Model:                          JZ2-H61-4/8/16

Power:                         30/30/22kW, IP56, F

Speed:                        1710/830/410r/min 

• Item Code: 300
• Production Capacity: 50
• Delivery Time: 20-25days

Including the application scope of the conveyor belts speed detector locked-rotor monitoring, motor running state monitoring, wind power generation device blade biggest revolutions surveillance and monitoring of motor, widely used in metallurgy, petroleum, electric power, mine, cement, building materials, bulk materials handling, water conservancy, chemical industry, packaging, food, food, textile, paper pulp and paper industry.

This series air compressors are mainedly used onboard ship to start the maine and auxilairy engine.The are directly driven by marine induction motors.
The air compressors are two stage, single cylinder compressor cooled by fresh water or sea water. Liquid-gas separators are fitted on each stage. The air compressors are rotated clockwise viewed from the driven end.

Main Specifications

Capacity 45m3/h~195m3/h

Dis. Pressure Max. 3.5MPa

Revolution970rpm, 1170rpm, 1470rpm

Power supply AC380V/50Hz and AC440V/60Hz

Dis. Temperature less than 60

Lubrication oil

• Item Code: 306